HP WORKSTATION Z240T XEON E3-1270

System board form factor

ATX 24.89 x 24.38 mm (9.8 x 9.6 in)

Processor socket

Single LGA 1151

CPU bus speed

DMI

Memory expansion slots

4 DDR4 memory slots

Memory type supported

DDR4, UDIMM (unbuffered), ECC and non-ECC

Memory modes

Non-interleaved for single channel. Interleaved when both channels are populated.

Memory speed supported

2133MT/s DDR4

Memory protection

ECC available on data

Maximum memory

64 GB

Memory configuration

4GB, 8GB and 16GB non-ECC/4GB, 8GB and 16GB ECC unbuffered DIMMs are supported. ECC and non-ECC memory DIMMs cannot be mixed on the same system.

PCI express connectors

1 PCI Express Gen3 slot x 1 mechanical/ x 1 electrical (full height, full length)

1 PCI Express Gen3 slot x 16 mechanical/ x 16 electrical (full height, full length)

1 PCI Express Gen3 slot x 4 mechanical/ x 4 electrical (full height, full length)

1 PCI Express Gen3 slot x 16 mechanical/ x 4 electrical (full height, full length)

NOTE:

In the PCIe Gen3 (x 16 electrical/x 16 mechanical) slot, if it is not being used for a graphics card, only cards certified as After Market Options for this platform are supported.

PCI connectors (5 V)

1 (optional) PCI slot, full height, full length

Supported drive interfaces

Integrated (4) Serial ATA interfaces (6 Gb/s SATA). One port can optionally be used for eSATA. RAID 0 and 1 supported. Factory integrated RAID is Microsoft Windows only. RAID 5 is supported by Software XOR.

None

NOTE:

Requires identical hard drives (speeds, capacity, interface)

Intel HD Graphics 530 (on Core i3/i5/i7-6xxx processors); Intel Integrated Graphics for Xeon processors

Based on Unified Memory Architecture (UMA) – a region of system memory is reserved and dedicated to the graphics display.

Support for Mic1 DVI-D and 2 DP 1.2 graphics ports integrated in motherboard; Supports up to three simultaneous displays across DP and DVI-D outputs.

1 DVI-D and 2 DP 1.2 graphics ports integrated in motherboard; Supports up to three simultaneous displays across DP and DVI-D outputs.

Maximum resolution supported on DVI- D ports: 1920 x 1200 at 60Hz

Maximum resolution supported on DP 1.2 ports: 3840×2160 at 60Hz

Integrated Ethernet PHY Connection I219LM. Management capabilities: WOL, PXE 2.1 and AMT 9

External SATA (eSATA): 1 port eSATA capable (SATA 3) with optional eSATA after-market option cable kit

No

No

1 internal header (requires optional serial port adapter kit)

No

1 internal header (optional parallel port adapter required)

Yes

USB connectors

Front: 2 USB 3.0, 1 USB 2.0, 1 USB 2.0 charging data port

Rear: 4 USB 3.0, 2 USB 2.0

Internal: 1 USB 3.0 and 3 USB 2.0 ports available as 2 separate 2 x 6 (3.0 x 1.2.0 x 1) and 1 x 6 (2.0 x 1) headers: supports 1 HP Internal USB port kits plus one USB 3.0 SD card reader

HD integrated audio

Yes

Flash ROM

Yes

CPU fan header

Yes

Chassis fan header

1 rear system chassis fan header

Front control panel/speaker header

Yes

CMOS battery holder – lithium

Yes

Integrated trusted platform module

Integrated TPM 1.2

The TPM module disabled where restricted by law, i.e. Russia

Power supply headers

Yes

Power switch, power LED and hard drive LED header

Yes

Clear password jumper

Yes

Keyboard/mouse

USB or PS/2

Operating voltage range

90-269 VAC

Maximum: 890 btu/hr (224 kcal/hr)

Rated voltage range

100-240 VAC

Rated line frequency

50-60 Hz

Operating line frequency range

47-66 Hz

Rated input current

6A at 100-240 V

Heat dissipation

Typical: 444 btu/hr (112 kcal/hr)

Maximum: 1484 btu/hr (374 kcal/hr)

Power supply fan

80 x 80 x 25 mm (3.1 x 3.1 x 0.98 in) 4-wire PWM

ENERGY STAR qualified (config dependent)

Yes

CECP compliant at 220V

Yes

FEMP standby power compliant

Yes, with wake-on-LAN disabled: < 2 W in 55 – power off

Built-in self test (BIST) LED

Yes

Surge tolerant full ranging power supply (withstands power surges up to 2000 V)

Yes

Hood lock header

Yes

ErP Lot 6- Tier 1 compliance at 230 V

Yes

ErP Lot 6- Tier 2 compliance at 230 V

Yes

Environmental requirements

Operating: 5° to 35° C (40° to 95° F)

Non-operating: -40° to 60° C (-40° to 140° F)

Operating: 10% to 90% (non-condensing)

Non-operating: 5% to 95%, 38.7° C (101.6° F) maximum wet bulb temperature

Operating: 3,000 m (10,000 ft)

Non-operating: 9,100 m (30,000 ft)

Operating: 40 g, 2-3 ms, half-sine

Non-operating: 160 cm/s, 2-3 ms, half-sine. Square: 422 cm/s, 20 g

Vibration:

Operating random: 0.5g (rms), 5-300 Hz

Non-operating random: 2.0g (rms), 10-500 Hz

Cooling

Above 1524 m (5,000 ft) altitude, maximum operating temperature is de-rated by 1.8° F (1° C) per 305 m (1000 ft) elevation increase.

Access panel

Tool-less, except for the processor heatsink.

Optical drive

Tool-less

Hard drives

Tool-less

Expansion cards

Tool-less

Processor socket

Tool-less, except for the processor heatsink

Green user touch points

Yes, on tool-less internal chassis mechanisms

Color-coordinated cables and connectors

Yes

Memory

Tool-less

System board

Screw-in

Dual color power and HD LED on front of computer

Yes

Configuration record SW

Yes

Over-temp warning on screen

Yes

Restore CD/DVD set

Consists of an operating system DVD (OSDVD) and a driver DVD (DRDVD). OSDVD restores the original operating system. DRDVD will provide all drivers for the system. The DRDVD may also contain applications that originally shipped with the system for optional installation. Applications can also be obtained from HP.com. OSDVD and DRDVD are orderable with the system and available from HP Support.

Dual function front power switch

Yes, causes a fail-safe power off when held for 4 seconds

Padlock support

Yes (optional): locks side cover and secures chassis from theft

0.22 in diameter padlock loop at rear of system

Cable lock support

Yes, Kensington Cable Lock (optional): Locks side cover and secures chassis from theft 3 mm x 7 mm slot at rear of system

Universal chassis clamp lock support

Yes (optional): Locks side cover and locks cables to chassis. Secures chassis from theft and allows multiple units to be chained together when used with optional cable Threaded feature at rear of system

Solenoid lock and hood sensor

Yes (optional)

The Solenoid Hood Lock eliminates the need for a physical key by making the chassis lockable through software and a password. You can also lock and unlock the chassis remotely over the network. The sensor kit detects when the access panel has been removed.

Rear port control cover

Yes, locks rear IO cables to prevent cable theft

Serial, parallel, USB, audio, network, enable/disable port control

Yes, enables or disables serial, USB, audio, and network ports

Removable media write/boot control

Yes, prevents ability to boot from removable media on supported devices (and can disable writes to media)

Power-on password

Yes, prevents an unauthorized person from booting up the workstation

Setup password

Yes, prevents an unauthorized person from changing the workstation configuration

3.3 V aux power LED on system PCA

Yes

NIC LEDs (integrated) (green and amber)

Yes

CPUs and heatsinks

A T-15 Torx or flat blade screwdriver is needed to remove the CPU heatsink before the CPU can be removed. CPU removal is tool-less

Power supply diagnostic LED

Yes

Front power button

Yes, ACPI multi-function

Front power LED

Yes

Front hard drive activity LED

Yes, white

Front ODD activity LED

Yes

Internal speaker

Yes

System/emergency ROM flash recovery

Recovers corrupted system BIOS.

Cooling solutions

92 x 92 x 25 mm 4-wire PWM (non-serviceable)

Power supply fans

92 x 92 x 25 mm 4-wire PWM (non-serviceable)

CPU heatsink fan

Mainstream (<= 65 W; 92 mm x 92 mm x 52.5 mm

Chassis fan

No

Memory heatsink fan

Advanced Configuration and Power Management Interface (ACPI). Allows the system to wake from a low power mode and controls system power consumption, making it possible to place individual cards and peripherals in a low-power or powered-off state without affecting other elements of the system

HP PC hardware diagnostics UEFI

HP PC Hardware Diagnostics (UEFI) enables hardware level testing outside the operating system on many components. The diagnostics can be invoked by pressing F2 at POST, and is available as a download from HP Support.

Access panel key lock

No

ACPI-ready hardware

Advanced Configuration and Power Management Interface (ACPI):

Allows the system to wake from a low power mode.

Controls system power consumption, making it possible to place individual cards and peripherals in a low-power or powered-off state without affecting other elements of the system.

Integrated chassis handles

Rear recessed handle; optional optical bay front handle available.

Power supply

Requires T15 Torx or flat blade screwdriver

PCI card retention

Yes, rear (all), middle (optional), front (full-length cards with extender)

Flash ROM

Yes

Diagnostic power switch LED on board

Yes

Clear password jumper

Yes

Clear CMOS button

Yes

DIMM connectors

Yes

BIOS 32-bit Services

Standard BIOS 32-bit Service Directory Proposal v 0.4

PCI 3.0 support

Full BIOS support for PCI Express through industry standard interfaces

ATAPI

ATAPI Removable Media Device BIOS Specification Version 1.0

BBS

BIOS Boot Specification v 1.01

Provides more control over how and from what devices the workstation will boot

WMI support

WMI is Microsoft’s implementation of Web-Based Enterprise Management (WBEM) for Windows. WMI is fully compliant with the Distributed Management Task Force (DMTF) Common Information Model (CIM) and WBEM specifications

BIOS power on

Users can define a specific day-of-week and time for the system to power on

ROM based computer setup utility (F10)

Review and customize system configuration settings controlled by the BIOS

System/emergency ROM flash recovery with video

Recovers system BIOS in corrupted Flash ROM

Replicated setup

Saves BIOS settings to USB flash device in human readable file. Repsetup.exe utility can then replicate these settings on machines being deployed without entering Computer Configuration Utility (F10 Setup)

SMBIOS

System Management BIOS 2.7.1, for system management information

Boot control

Disables the ability to boot from removable media on supported devices

Memory change alert

Alerts management console if memory is removed or changed

Makes it possible to place individual cards and peripherals in a low-power or powered-off state without affecting other elements of the system. Supports ACPI 4.0 for full compatibility with 64-bit operating systems.

Thermal alert

Monitors the temperature state within the chassis.

Three modes:

• NORMAL – normal temperature ranges
• ALERTED – excessive temperatures are detected, raises a flag so action can be taken to avoid shutdown or provide for a smoother system shutdown.
• SHUTDOWN – excessive temperatures are encountered. Automatically shuts down the computer without warning before hardware component damage occurs.

Remote ROM flash

Provides secure, fail-safe ROM image management from a central network console.

Updates can be performed before starting the OS

Updates can be periodically scheduled

ACPI (Advanced Configuration and Power Management Interface)

Allows the system to enter and resume from low power modes (sleep states)

Enables an operating system to control system power consumption based on the dynamic workload

Makes it possible to place individual cards and peripherals in a low-power or powered-off state without affecting other elements of the system

Supports ACPI 4.0 for full compatibility with 64-bit operating systems.

Ownership tag

A user-defined string stored in non-volatile memory that is displayed in the BIOS splash screen.

Remote wakeup/remote shutdown

System administrators can power on, restart, and power off a client computer from a remote location

ASF 2.0 compliant

No

Instantly available PC (suspend to RAM – ACPI sleep state S3)

Allows for very low power consumption with quick resume time

Remote system installation via F12 (PXE 2.1) (Remote Boot from Server)

Allows a new or existing system to boot over the network and download software, including the operating system

ROM revision levels

Reports the system BIOS revision level in Computer Configuration Utility (F10 Setup). Version is available through an industry standard interface (SMBIOS) so that management SW applications can use and report this information

System board revision level

Allows management SW to read revision level of the system board

Revision level is digitally encoded into the HW and cannot be modified

Start-up diagnostics (power-on self-test)

Assesses system health at boot time with selectable levels of testing

Auto setup when new hardware installed

System automatically detects addition of new hardware.

Keyboard-less operation

The system can be booted without a keyboard

Localized ROM setup

Common BIOS image supports System Configuration Utility (F10 Setup) menus in 12 languages with local keyboard mappings

Asset tag

Enables the user or IT administrator to set a unique tag string in non-volatile memory

Per-slot control

Allows I/O slot parameters (option ROM enable/disable) to be configured individually

Adaptive cooling

Control parameters are set according to detected hardware configuration for optimal acoustics

Pre-boot diagnostics

(Pre-video) critical errors are reported via beeps and blinks on the power LED

Intel Active Management Technology (AMT)

AMT 11.0; allows workstation status to be monitored on a remote console

Digitally and cryptographically signed BIOS

Helps to prevent the installation of unauthorized versions of a BIOS (a rogue BIOS) from a virus, malware, or other code that could lead to compromised system security, data access, physical service, or even system board replacement

Master boot record protection

A feature in the HP BIOS that prevents changes and/or infections to the Master Boot Record. Useful in protecting from viruses

Boot block emergency recovery mode (BIOS Recovery)

The HP BIOS offers a write-protected boot block ROM that provides recovery from a failed flashing of the computer BIOS. This special recovery mode prevents the system from becoming unusable or “bricked” when a BIOS update is interrupted

Industry standard

Revision supported by the BIOS

UEFI specification revision

UEFI 2.4.0

ACPI

Advanced Configuration and Power Management Interface, Version 4.0

ASF

Alert Standard Format Specification, Version 2.0

ATA (IDE)

AT Attachment 6 with Packet Interface (ATA/ATAPI-6), Revision 3b

CD Boot

“El Torito” Bootable CD-ROM Format Specification Version 1.0

EDD

Enhanced Disk Drive Specification Version 1.1

BIOS Enhanced Disk Drive Specification Version 3.0

PCI

PCI Local Bus Specification, Revision 2.3

PCI Power Management Specification, Revision 1.1

PCI Firmware Specification, Revision 3.0

PCI express

PCI Express Base Specification, Revision 2.0

PCI Express Base Specification, Revision 3.0

PMM

POST Memory Manager Specification, Version 1.01

SATA

Serial ATA Specification, Revision 1.0a

-Serial ATAII: Extensions to Serial ATA 1.0, Revision 1.0a

Serial ATAII Cables and Connectors Volume 2 Gold

SATA-IO SATA Revision 3.0 Specification

SPD

PC SDRAM Serial Presence Detect (SPD) Specification, Revision 1.2B

TPM

Trusted Computing Group TPM Specification Version 1.2

USB

Universal Serial Bus Revision 1.1 Specification

Universal Serial Bus Revision 2.0 Specification

Universal Serial Bus Revision 3.0 Specification

Intel Active Management Technology (AMT)

An advanced set of remote management features and functionality which provides network administrators the latest and most effective tools to remotely discover, heal, and protect networked client systems regardless of the system’s health or power state. AMT 11.0 includes the following advanced management functions:

• Power management (on, off, standby, reset)
• Hardware/software inventory (includes BIOS and firmware revisions
• Hardware alerting
• Agent presence
• System defense filters
• SOL (Serial Over LAN)
• ME wake-on-LAN
• DASH 1.1 compliance
• IPv6 support
• Fast call for help – a client inside or outside the firewall may initiate a call for help via BIOS screen, periodic connections, or alert triggered connection
• Remote scheduled maintenance – pre-schedule when the PC connects to the IT or service provider console for maintenance. Remote PCs can get required patches, be inventoried, etc by connecting to their IT console or Service Provider when it’s convenient
• Remote alerts – automatically alert IT or service provider if issues arise
• Access monitor – provides oversight into Intel AMT actions to support security requirements
• PC alarm clock
• Protected audio video path (PAVP)
• Microsoft NAP support
• Host base set-up and configuration
• Management Engine (ME) firmware roll back
• Enhanced KVM resolution (Up to 4K)

Intel vPro technology

The HP Z240 workstations support Intel vPro technology when purchased with a vPro technology capable CPU: Intel Xeon E3 processor family or 6th Generation Intel Core i5/i7 processors with Intel VT-d/VT-x and Intel TXT technology

Service, support, and warranty

Program to proactively communicate Product Change Notifications (PCNs) and customer advisories by email to customers, based on a user-defined profile.

PCNs provide advance notification of hardware and software changes to be implemented in the factory providing time to plan for transition.

Customer advisories provide concise, effective problem resolution, greatly reducing the need to call technical support